Medium Vacuum Systems

1. Vacuum Impregnation plants

2. Vacuum laminators

3. Epoxy mixing and potting plants

4. Vacuum Ovens

Technical Specifications :
  • Vacutech make Vacuum Oven is Fabricated with SS 304 material
  • Vacuum sealing with viton card 12mm around the door
  • Front Hing door to be fixed with center locking handle four sides for vacuum sealing
  • We are providing “C”clamp arrangement with handle for vacuum tight.
  • Total heating arrangement with thyiresistor power supply
  • Inside the oven lighting arrangement to be fixed. {Hologen Lamp}
  • Heating System, Rotary Vacuum pump ON & OFF to be operated by PLC System
  • The Vacuum Oven is powder coated with castor wheels and jack support arrangements

Vacutech supplies Double Stage Rotary Vacuum pump with the following specifications :

a. Motor Capacity –1 Hp single 3 phase 1440 RPM.
b. Oil capacity 3 Liters.
c. Noise less.
d. Anti suck back facility.
e. Light weight.
f. Inlet connection KF 25.
g. Fixed in the mouth bourden vacuum dial gauge



5. Controlled atmosphere glove box system

Technical Specifications :
  • Vacutech supplies Glove Chamber with the following special features.
  • The Glove Box is fabricated out of Stainless Steel. Glass Window is fixed on the front side.
  • Neoprene gloves with sufficient length to handle thematerials inside the chamber. It is designed for maintaining water pressureabove atmosphere with inert gas/nitrogen.
  • The main glove box would bepurged with inert gas, racks for storage of materials/instruments are provided inside the chamber. Racks are made of SS material.
  • FOOT SWITCH:
    Foot Switch is used for controlling barometric Pressure in the Glove Box.
  • ANTE CHAMBER:
    Ante-Chamber proved withdoor to main glove chamber to enable easy transfer of material.
  • ISOLATION VALVE
  • VACUUM PUMP :
    Double Stage Direct Drive Rotary High Vacuum Pump
  • INTER CONNECTING PIPING
  • VALVES:
    Solenoid operated valves to isolate pump from Glove Box and antechamberand are mounted outside the chambers. Also, solenoid controlled valves willbe provided for back filling to Glove box and antechamber.
  • FLANGES:
    O’ring sealed flanges are all machined flanges.
  • PORT CONNECTIONS:
    All port connections are KF-10/25 couplings only.
  • WELDINGS: All welding are done by TIG Argon welding.

6. Evacuation and oil filling systems